Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 926

• Use the no aaa accounting exec or no aaa accounting commands to disable aaa accounting and optionally delete an accounting method list. Example The following shows several examples of the command. (console)#configure (console-config)#aaa accounting commands default stop-only tacacs (console-config)#aaa accounting exec default start-stop radius (console-config)#aaa accounting dot1x default start-stop radius (console-config)#aaa accounting dot1x default none (console-config)#exit For the same set of accounting type and list name, the administrator can change the record type, or the methods list, without having to first delete the previous configuration. The first aaa command creates a method list for exec sessions with the name ExecList, with record-type as stop-only and the method as TACACS+. The second command changes the record type to start-stop from stop-only for the same method list. The third command for the list changes the methods list to {tacacs,radius} from {tacacs}. (console)#configure (console-config)#aaa accounting exec ExecList stop-only tacacs (console-config)#aaa accounting exec ExecList start-stop tacacs (console-config)#aaa accounting exec ExecList start-stop tacacs radius (console-config)#exit This example shows how to enable dot1x accounting to RADIUS server for start, interim and stop reports. Interim reports are sent every 60 minutes. (console)#configure (console-config)#aaa accounting dot1x default start-stop radius (console-config)#aaa accounting update periodic 60 The following shows an example of the no version of the command. (console)#configure (console-config)#aaa accounting commands userCmdAudit stop-only tacacs (console-config)#no aaa accounting commands userCmdAudit (console-config)#exit aaa accounting delay-start Use the aaa accounting delay-start command to delay the sending of AcctStart packets to RADIUS accounting server(s). Security Commands 926