Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 1864

console(config-if-vlan100)#ip vrf forwarding Red console(config-if-vlan100)#exit console(config)#interface vlan 200 console(config-if-vlan100)#ip vrf forwarding Blue console(config-if-vlan100)#exit maximum routes This command reserves the number of routes allowed and sets the maximum limit on the number of routes for a virtual router instance in the total routing table space for the router, provided there is enough free space in the router's total routing table. Syntax maximum routes {limit | warn threshold} no maximum routes [warn] • limit-Reserve this number of routes for the VRF instance. • threshold -The percentage of total routes over which the router issues a warning that the router has allocated the specified number of routes. Range 1-100. Default Configuration A VRF is limited by the number of unreserved routes available. Command Mode Virtual Router Configuration mode User Guidelines Use the no maximum routes command to reset the limit to the default (unlimited). Use the no maximum routes warn command to reset the threshold limit to the default. A VRF instance cannot exceed the configured number of routes, nor may other VRFs utilize the resources allocated to a VRF if a limit is specified for the VRF. The maximum number of routes depends on the platform and the selected SDM template. Refer to the Platforms Constants table in the Users Configuration Guide for the maximum routes available for the selected Layer 3 Routing Commands 1864