Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 1769

area nssa translator-stab-intv Use the area nssa translator-stab-intv command in Router OSPFv3 Configuration mode to configure the translator stability interval of the NSSA. The stability interval is the period of time that an elected translator continues to perform its duties after it determines that its translator status has been deposed by another router. Syntax area areaid nssa translator-stab-intv seconds no area areaid nssa translator-stab-intv • areaid - Valid OSPF area identifier. • seconds - Translator stability interval of the NSSA. (Range: 0-3600 seconds) Default Configuration This command has no default configuration. Command Mode Router OSPFv3 Configuration mode. User Guidelines This command has no user guidelines. Example The following example configures a translator stability interval of 100 seconds for the area 1 NSSA. console(config)#ipv6 router ospf console(config-rtr)#area 1 nssa translator-stab-intv 100 area range (Router OSPFv3) Use the area range command in Router OSPF Configuration mode to configure a summary prefix for routes learned in a given area. If the area has not been previously created, this command creates the area and then applies the range parameters. There are two types of area ranges. An area range can be Layer 3 Routing Commands 1769