Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 1359

• ipv6-address [interface interface-id]-The IPv6 address of a BGP peer. If the peer address is an IPv6 link local address, the interface that defines the scope of the link local address must be given. • autodetect interface interface-id-(Optional) The routing interface on which the neighbor's link local IPv6 address is auto detected. The interface ID must be a VLAN routing interface. Default Configuration There is no default configuration for this command. Command Mode Privileged Exec mode, Global Configuration mode and all Configuration submodes User Guidelines The following fields are displayed. Field BGP table version Local router ID Status Codes Network Next Hop Metric LocPref Path Description Each time phase 2 of the BGP decision process runs to select new BGP routes, this number is incremented The IP address of the local router. p - The route has been updated in Adj-RIB-Out since the last UPDATE message was sent. Transmission of an UPDATE message is pending. The Destination prefix. The BGP Next Hop as advertised to the peer. The value of the Multi Exit Discriminator (MED), if the MED is advertised to the peer. The local preference. Local preference is never advertised to external peers. The AS path. The AS path does not include the local AS number, which is added to the beginning of the AS path when a route is advertised to an external peer. Layer 3 Routing Commands 1359