Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 779

show interfaces traffic Use the show interfaces traffic command to display traffic information. Syntax show interfaces traffic [interface-id] interface-id-A valid Ethernet interface specifier. Port-channels are not allowed with this command as the queuing and drops occur on the individual interfaces and not on the port channel. Default Configuration The default is to show the global traffic class group configuration. Command Mode Privileged Exec mode User Guidelines The interface-id parameter is optional. The following information is displayed: Field Congestion drops Tx Queue Rx Queue Color drops Description Packets dropped due to congestion. This includes packets that exceeded an upper WRED threshold and packet dropped by WRED. ECN marked packets are not counted as dropped. The instantaneous number of cells queued for egress on the interface. Cells are 208 bytes. The instantaneous number of cells queued for ingress on the switch. Cells are 208 bytes. If a port is configured for PFC, cells are buffered on ingress. If not, cells are buffered on egress. The number of packets dropped due to WRED dropping of packets. Packets exceeding the upper WRED threshold are counted in the drops bucket. ECN marked packets are not counted as dropped. Layer 2 Switching Commands 779