Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 930

The ias method utilizes the internal authentication server for authentication. Configure the ias database with the aaa ias-user command. Authentication via the internal authentication server only supports the EAP-MD5 method. Command History Syntax updated in version 6.6 firmware. Example The following example configures 802.1x authentication to use no authentication. Absent any other configuration, this command allows all 802.1x users to pass traffic through the switch. console(config)# aaa authentication dot1x default none The following example configures 802.1x authentication to use a RADIUS server. A RADIUS server must be configured previously using the radius server host auth command for the radius method to succeed. console(config)#aaa authentication dot1x default radius aaa authentication enable Use the aaa authentication enable command in Global Configuration mode to set authentication for accessing higher administrator privilege levels when logged in to the switch console. To return to the default configuration, use the no form of this command. Syntax aaa authentication enable {default | list-name} {method1 [method2...]} no aaa authentication enable {default | list-name} • default - Uses the listed authentication methods that follow this argument as the default list of methods, when using higher privilege levels. • list-name - Character string used to name the list of authentication methods activated, when using access higher privilege levels. (Range: 1-15 characters) • method1 [method2...] - Specify at least one from the following table: Security Commands 930