Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 152

Command Description Modea dos-control sipdip dos-control tcpflag dos-control tcpfrag rate-limit cpu show dos-control show system internal pktmgr storm-control broadcast storm-control multicast storm-control unicast Enables Source IP Address = Destination IP GC Address (SIP=DIP) Denial of Service protection. Enables TCP Flag Denial of Service protections. GC Enables TCP Fragment Denial of Service GC protection. Configures the rate in packets-per-second for the GC number of IPv6 data packets trapped to CPU when the packet fails to be forwarded in the hardware due to unresolved hardware address of the destined IPv6 node. Displays Denial of Service configuration PE information. Displays the configured CPU rate limit for PE unknown packets in packets per second. Enables Broadcast storm control. IC Enables the switch to count multicast packets IC together with broadcast packets. Enables unicast storm control. IC a. For the meaning of each Mode abbreviation, see Mode Types. Management ACL Command deny (management) management access-class management access-list no priority (management) permit (management) show management accessclass Description Modea Defines a deny rule. MA Defines which management access-list is used. GC Defines a management access-list, and enters GC the access-list for configuration. Removes a permit or deny condition from a MA Management Access list. Defines a permit rule. MA Displays the active management access-list. PE Dell EMC Networking CLI 152