Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 927

Syntax aaa accounting delay-start [extended-time delay_value] no aaa accounting delay-start • delay_value-The maximum number of seconds to wait before sending the Acct-Start packet to the RADIUS accounting server. Range: 1 to 300 seconds. Default Configuration By default, the switch will wait up to the maximum of maximum number of retries (radius server retransmit) multiplied by the timeout (radius server timeout). Command Mode Global Configuration mode User Guidelines Dell EMC recommends that a fixed time be configured for the delay in order to ensure timely delivery of Acct-Start packets to the RADIUS accounting server. Acct-Interim and Acct-Stop messages are not delayed, nor are any Authentication messages delayed by configuration of this command. If the switch discovers that the host has obtained an IPv4/IPv6 address, it may send the Acct-Start packet before the expiry of the delay period. The delay is accounted for in the Acct-Delay-Time attribute sent to the RADIUS accounting server. Use the show authentication clients command to display the discovered IPv4 address/IPv6 address received from RADIUS server, if any. Command History Command introduced in firmware release 6.5.2. aaa accounting update Use the aaa accounting update command to enable the sending of interim accounting packets to RADIUS accounting server(s). Security Commands 927