Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 1404

• rd route-distinguisher-Displays the NLRI prefixes that match the named route distinguisher. • vrf vrf-name-Displays the NLRI prefixes associated with the named VRF instance. • ip-prefix/length - IP address of a network in the routing table and the length of the mask (0 to 32). The slash mark must be included. • statistics - Displays BGP VPNv4 statistics Default Configuration There is no default configuration. Command Mode Privileged Exec and Global Configuration modes User Guidelines The format and field descriptions are the same as for show ip bgp neighbors with the following exceptions: • If the peer address ("Remote Address") is a link local address, the next line of output indicates the scope of the address. • No "IPv4 Outbound Update Group" is listed. • No IPv4 prefix statistics are shown, since this implementation does not support advertisement of IPv4 prefixes over IPv6 transport. • "RFC 5549 Support" is displayed only if the BGP neighbor is peered over IPv6 network. • If the peer is configured as "autodetect", the "Remote Address" shows detected IPv6 address or "Unresolved" if the peer is not detected by the autodetect feature. • The "Autodetect Status" field is displayed only if the peer is configured as "autodetect". The field shows one of the following status': "Peer is detected", "Peer is not detected" or "Multiple peers are detected". Layer 3 Routing Commands 1404