Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 220

Command Description Modea standby switch renumber telnet traceroute traceroute ipv6 update bootcode Configures the standby in the stack. SG Changes the identifier for a switch in the stack. GC Logs into a host that supports Telnet. PE Discovers the IP routes that packets actually PE take when traveling to their destinations. Discovers the IP routes that packets actually PE take when traveling to their destinations. Updates the boot code on one or more switches. PE a. For the meaning of each Mode abbreviation, see Mode Types. Telnet Server Command ip telnet server disable ip telnet port show ip telnet Description Modea Enables/disables the Telnet service on the GC switch. Configures the Telnet TCP port number on the GC switch. Displays the status of the Telnet server and the PE Telnet TCP port number. a. For the meaning of each Mode abbreviation, see Mode Types. Time Ranges Command time-range [name] absolute periodic show time-range Description Modea Creates a time range identified by name, GC consisting of one absolute time entry and/or one or more periodic time entries. Adds an absolute time entry to a time range. TRC Adds a periodic time entry to a time range. TRC Displays a time range and all the PE absolute/periodic time entries that are defined for the time range. Dell EMC Networking CLI 220