Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 147

802.1x Command Description Modea dot1x eapolflood Enables the capability of creating VLANs GC dynamically when a RADIUS-assigned VLAN does not exist in the switch. dot1x eapolflood Enables the flooding of received IEEE 802.1x GC frames in the VLAN. clear authentication sessions Begins the initialization sequence on the PE specified port. mab Enables MAB on an interface. IC default mab Configures the switch to transmit EAP, PAP, or IC CHAP credentials to the RADIUS server for MAB-authenticated devices connected to the interface. mab request format attribute 1 Configures the format of the MAC address sent IC, in the User-Name attribute. GC dot1x max-reauth-req Sets the maximum number of times that the IC switch sends Extensible Authentication Protocol EAP-Request/Identity frames to which no response is received before restarting the authentication process. dot1x max-req Sets the maximum number of times the switch IC sends an EAP-request frame to the client before restarting the authentication process. dot1x pae Enables 802.1X on an interface and sets the IC interface role. dot1x port-control Enables manual control of the authorization IC state of the port. authentication max-users Sets the maximum number of clients supported IC on the port when multi-auth authentication is enabled on the port. authentication port-control Enables manual control of the authorization IC state of the port. authentication periodic Enables periodic reauthentication of the client. IC Dell EMC Networking CLI 147