Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 217

Command banner motd acknowledge buffers clear checkpoint statistics clear counters stackports connect exit hostname initiate failover load-interval locate logout member memory free lowwatermark nsf ping process cpu threshold quit Description Acknowledges message-of-the-day banner. Modea GC Configures the rising and falling thresholds for GC the issuance of the message buffer SNMP trap and notification via a SYSLOG message. Clears the statistics for the checkpointing GC process. Clears the statistics for all stack-ports. PE Connects to the serial console of a different PE stack member. Disconnects the serial connection to the remote UE unit. Specifies or modifies the switch host name. GC Forces failover of management unit. GC Loads the interface utilization measurement IC interval. Locates a switch by LED blinking. PE Disconnects the serial connection to a remote UE unit on a stack member. Preconfigures a stack member. SG Configures the notification of a low memory GC condition on the switch for the issuance of the CPU overload SNMP trap and notification via a SYSLOG message. Specifies non-stop forwarding. GC Sends ICMP echo request packets to another UE node on the network. Configures the rising and falling thresholds for GC the issuance of the CPU overload SNMP trap and notification via a SYSLOG message. Disconnects the serial connection to the remote UE unit on a stack member. Dell EMC Networking CLI 217