Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 1828

• minadvertinterval seconds-Minimum time in seconds allowed between sending router advertisements from the interface. (Range: 3 to value of maximum advertisement interval in seconds) • preference number-Preference of the address as a default router address, relative to other router addresses on the same subnet. (Range: 2147483648 to 2147483647) • address address-IP address for router discovery advertisements. (Range: 224.0.0.1 [all-hosts IP multicast address] or 255.255.255.255 [limited broadcast address]) Default Configuration • Router discovery is disabled by default. • 1800 seconds is the default value for holdtime. • 600 seconds is the default value for maxadvertinterval. • The minadvertinterval default value is 450. • The preference default value is 0. • IP address 224.0.0.1 is the default configuration for address. Command Mode Interface Configuration (VLAN) mode User Guidelines This command has no user guidelines. Example The following example enables router discovery on the selected interface. console(config)#interface vlan 15 console(config-if-vlan15)#ip irdp ip irdp holdtime Use the ip irdp holdtime command in Interface Configuration mode to configure the value, in seconds, of the holdtime field of the router advertisement sent from this interface. Use the no form of the command to set the time to the default value. Layer 3 Routing Commands 1828