Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 1211

When the switch groups parameter is given, the following information is displayed: Parameter Group Type Group Id Reference Count Duration Bucket Count Reference Group Id Description Type of Group: Indirect, All, Select, etc. Unique ID for the Group This count indicates how many Select groups are referring to the current Indirect group. Reference Count is used only for Indirect groups. The time since the group was created. Number of Buckets in the group. References the Indirect group ID and used for Select group only. When the switch flows parameter is selected, the following output is shown: Parameter Flow Type Flow Table Flow Priority Match Criterion Ingress Port Action Duration Idle Installed in hardware Description Type of the Flow 1.0 Flow or Layer 2 Match etc. The hardware table where the flow is installed. Priority of the flow versus other flows. Higher is better. The match criterion specified by the flow with the field and value like ingress port or ether type The port on which the flow is active. The action specified by the flow. The time since the flow was created The time since the flow was hit. Shows 0 if for some reason the flow could not be added in the hardware. Command History Introduced in version 6.3.0.1 firmware. Data Center Technology Commands 1211