Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 1408

AS Path 18 50 27 Origin Incomplete Type External IGP Cost 10 Peer (Peer ID 200.1.1.1 (18.24.1.3) BGP Next Hop 200.1.1.1 Extended Community RT:3:300 template peer Use the template peer command in router configuration mode to create a BGP peer template and enter peer template configuration mode. To delete a peer template, use the no form of this command. Syntax template peer name no template peer name • name-The name of the template. The name may be no more than 32 characters. Default Configuration No peer templates are configured by default. Command Mode BGP Router Configuration mode User Guidelines A peer template can be configured with parameters that apply to many peers. Neighbors can then be configured to inherit parameters from the peer template. A peer template can include both session parameters and peer policies. Peer policies are configured within an address family configuration mode and apply only to that address family. You can configure up to 32 peer templates. When changing a template, the change is immediately applied to all neighbors that inherit from the template (though policy changes are subject to a three-minute delay.) The following commands can be issued in peer template configuration mode and thus added to a peer template: Layer 3 Routing Commands 1408