Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 925

Default Configuration Accounting is not enabled by default. Command Mode Global Configuration User Guidelines An accounting list is identified by the default keyword or a user-specified list_name. Accounting records, when enabled for a line-mode, can be sent at both the beginning and at the end of the session (start-stop) or only at the end (stop-only). If none is specified, accounting is disabled for the specified list. If tacacs is specified as the accounting method, accounting records are transmitted to a TACACS+ server. If radius is the specified accounting method, accounting records are transmitted to a RADIUS server. Note the following: • A maximum of five Accounting Method lists can be created for each exec and commands type. • Only the default Accounting Method list can be created for RADIUS. There is no provision to create more. • The same list-name can be used for both exec and commands accounting type • AAA Accounting for commands with RADIUS as the accounting method is not supported. • Start-stop or None are the only supported record types for RADIUS accounting. Start-stop enables accounting and None disables accounting. • RADIUS is the only accounting method type supported for 802.1X accounting. • For the same set of accounting type and list name, the administrator can change the record type or the methods list, without having to first delete the previous configuration. • Interim accounting is enabled using the aaa accounting update command. • Use either the aaa accounting dot1x default none or no aaa accounting dot1x default command to disable dot1x accounting. Security Commands 925