Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 176

Command Description Modea ip unnumbered Identifies an interface as an unnumbered IC interface and specifies the numbered interface providing the borrowed address. ip unnumbered gratuitous- Enables installation of a static interface route to IC arp accept the unnumbered peer upon receiving a gratuitous ARP. ip unreachables Enables the generation of ICMP Destination IC Unreachable messages. match ip address Specify IP address match criteria for a route RM map. match length Configures packet length matching criteria for a RM route map. match mac-list Configures MAC ACL match criteria for a route RM map. route-map Creates a policy based route map. GC set interface null0 Routes packets to interface null 0. RM set ip default next-hop Sets a list of default next-hop IP addresses RM to be used if no explicit route for the packet's destination address appears in the routing table. set ip next-hop Specifies the adjacent next-hop router in the RM path toward the destination to which the packets should be forwarded. set ip precedence Sets the IP precedence bits in the IP packet RM header. show ip brief Displays all the summary information of the IP. PE Maximum Next Displays all pertinent information about the IP PE Hops 16 interface. show ip policy Displays the route maps used for policy based PE routing on the router interfaces. show ip protocols Displays the parameters and current state of the PE active routing protocols. show ip route Displays the routing table. PE Dell EMC Networking CLI 176