Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 139

Security Commands AAA Command Description Modea aaa accounting Creates an accounting method list GC aaa accounting delay-start Delays the sending of Acct-Start packets to GC RADIUS accounting server(s) aaa accounting update Enables the sending of interim accounting GC packets to RADIUS accounting server(s). aaa authentication dot1x Specifies an authentication method for 802.1x GC default clients. aaa authentication enable Defines authentication method lists for GC accessing higher privilege levels. aaa authentication login Defines login authentication. GC aaa authorization Creates an authorization method list. GC aaa authorization network Enables the switch to accept VLAN assignment GC default radius by the RADIUS server. aaa ias-user username Configures IAS users and their attributes. Also GC changes the mode to aa user Configuration mode. aaa new-model This command is a no-op command. It is GC present only for compatibility purposes. aaa server radius dynamic- Enters radius dynamic authorization mode. GC author authentication critical recovery Controls the load placed on RADIUS servers. GC authentication enable Globally enables the Authentication Manager. GC authentication order Sets the order of authentication methods used IC on a port. authentication priority Sets the priority for the re-authentication IC methods used on a port. authentication timer restart Sets the interval after which reauthentication IC starts. Dell EMC Networking CLI 139