Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 2052

Default Configuration This command has no default configuration. Command Mode User Exec, Privileged Exec mode, Global Configuration mode and all Configuration submodes User Guidelines The VRF identified in the parameter must have been previously created or an error is returned. The VRF parameter is only available on the N3000-ON/N3100-ON/N3200ON series switches. The command provides the following information. Term Description Address Conflict Detection Status Whether the switch has detected an address conflict on any IP address. Set to Conflict Detected if detected, No Conflict Detected otherwise. Last Conflicting IP The IP address that was last detected as conflicting on any Address interface. Last Conflicting MAC Address The MAC Address of the conflicting host that was last detected on any interface. Time Since Conflict The time in days, hours, minutes, and seconds since the last Detected address conflict was detected. Example console#show ip address-conflict Address Conflict Detection Status...Conflict Detected Last Conflicting IP Address.........10.131.12.56 Last Conflicting MAC Address........00:01:02:04:5A:BC Time Since Conflict Detected........5 days 2 hrs 6 mins 46 secs console#show ip address-conflict Address Conflict Detection Status No Conflict Detected Switch Management Commands 2052