Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 2186

The community name may include any printable characters except a question mark, an at sign, or a backslash. Enclose the string in double quotes to include spaces within the name. The surrounding quotes are not used as part of the name. The CLI does not filter illegal characters and may accept entries up to the first illegal character or reject the entry entirely. Command History Modified in version 6.5 firmware. Example The following example configures community access string public to permit administrative access to SNMP at an administrative station with IP address 192.168.1.20. console(config)# snmp-server community public su ipaddress 192.168.1.20 snmp-server community-group Use the snmp-server community-group command in Global Configuration mode to map the internal security name for SNMP v1 and SNMP v2 security models to the group name. To remove the specified community string, use the no snmp-server community command. Syntax snmp-server community-group community-string group-name [ipaddress ipaddress] no snmp-server community-group community-string • community-string - The SNMP community identifier. See SNMP- COMMUNITYMIB (Range: 1-20 printable characters other than an at sign, a backslash, or a question mark.) • group-name - Name of a previously defined group. The group defines the objects available to the community. (Range: 1-30 characters) • ip-address - Specifies the IP address or subnet of the management station(s). If no IP address is specified, all management stations are permitted. Both IPv4 and IPv6 addresses are accepted. If a subnet is specified, it may be entered in the form of an IPv4 address, followed by a space and a forward slash, followed by the decimal number of significant Switch Management Commands 2186