Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 296

For an ACL with multiple match rules, processing occurs in order until a rule is matched. Only the counter associated with the matching rule is incremented. (e.g., consider an ACL with three rules, rule 1 does not match, and rule 2 is matched. Rule 3 is not processed. The counters for rule 1 and rule 3 are not incremented.) If an ACL rule is configured with a rate limit, the counter value is the matched packet count (i.e., both the forwarded and dropped packets are counted). If an ACL rule is configured without a rate limit, the counter value is the count of either the permitted or denied packets. ACL counters do not interact with DiffServ policies. ACL counters do not interact with PBR counters. ACL hit counters are associated with the ACL, not the interface on which the ACL is applied. An ACL applied to multiple interfaces will display identical (or nearly identical) counts for each interface. The count displayed is the sum of matching packets received or transmitted on all associated interfaces. Command History Updated in 6.3.0.1 firmware. Examples The following example displays the configured IP ACLs. console(config)#show ip access-lists Current number of ACLs: 4 Maximum number of ACLs: 100 ACL Name Rules Count Interface(s) Direction TO_FRM 2 437 Gi1/0/26 Inbound UPLINKS 5 0 Gi1/0/26 Outbound Allow-192-168-0-x 3 7617636 Gi1/0/29 Inbound The following example displays the IP ACLs configured on a device. console#show ip access-lists asdasd IP ACL Name: asdasd Inbound Interface(s): Gi1/0/7 Layer 2 Switching Commands 296