Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 934

aaa authorization Use the aaa authorization command to enable authorization and optionally create an authorization method list. A list may be identified by a userspecified list-name or the keyword default. Use the no form of the command to disable authorization and optionally delete an authorization list. Syntax aaa authorization {commands|exec|network}{default|list-name} {method1 [method2]} no aaa authorization {commands|exec|network} {default|list-name} • exec-Provides Exec authorization. All methods are supported. • commands-Performs authorization of user commands. Only none and TACACs methods are supported. • network-Performs RADIUS authorization. Only the default list is supported. • default-The default list of methods for authorization services. The list dfltCmdAuthList is the default list for command authorization and the list dfltExecAuthList is the default list for Exec authorization. • list-name-Character string used to name the list of authorization methods. The list name can consist of any alphanumeric character up to 20 characters in length. Use quotes around the list name if embedded blanks are contained in the list name. • method-The following authorization methods are supported: - local-Perform local authorization. - none-Do not perform authorization. All functions are authorized. - radius-Request authorization from the configured RADIUS servers. - tacacs-Request authorization from the configured TACACS+ servers. Default Configuration When authorization is enabled, the switch attempts to authorize the listed function using the configured method. Security Commands 934