Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 1955

Reserved Keyword tftp: usb: flash: backup-config unit Description Source or destination URL for a TFTP network server. The syntax for this alias is tftp:[[//location]/directory]/filename. An out-ofband IP address can be specified as described in the User Guidelines. Source or destination URL for a file on a mounted USB file system. Source or destination URL for the switch flash-based file system. Represents the backup configuration file. Indicates which unit in the stack is the target of the copy command. Default Configuration This command has no default configuration. Command Mode Privileged Exec mode User Guidelines When copying files from the switch, match a source URL with a destination URL. URLs may not exceed 160 characters in length, including filename, file path, hostname, ip address, user, and reserved keywords. When copying firmware onto the switch in a stacked configuration, use the show sfs and show version commands to check the status of stack firmware synchronization prior to a reboot. When copying scripts to the switch, use the script target syntax. Internally, all scripts, including the startup-config and backup-config, are stored with a header. The header is added when the script is downloaded to the switch and removed when the script is uploaded from the switch. Using the flash:// syntax as the target or source bypasses adding of the script header, ensuring that when a script is applied on the switch which was previously copied to the switch using the flash:// syntax, a syntax error will result. Switch Management Commands 1955