Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 1110

Captive Portal Commands Dell EMC Networking N1100-ON/N1500/N2000/N2100-ON/N2200ON/N3000-ON/N3100-ON/N3200-ON Series Switches The Captive Portal feature is a software implementation that blocks both wired and wireless clients from accessing the network until user verification has been established. Verification can be configured to allow access for both guest and authenticated users. Authenticated users must be validated against a database of authorized Captive Portal users before access is granted. The Authentication server supports both HTTP and HTTPS web connections. In addition, Captive Portal can be configured to use an optional HTTP port (in support of HTTP Proxy networks) or an optional HTTPS port. If configured, this additional port or ports are then used exclusively by Captive Portal. NOTE: This optional HTTP port is in addition to the standard HTTP port 80 which is currently being used for all other web traffic, and the optional HTTPS port is in addition to the standard HTTPS port 443 used for secure web traffic. Captive Portal Administrative Profile Commands authentication timeout Use the authentication timeout command to configure the time within which the user must enter their credentials. Use the "no" form of this command to reset the authentication timeout to the default. Syntax authentication timeout timeout no authentication timeout • timeout-The authentication timeout (Range: 60-600 seconds). Default Configuration The default authentication timeout is 300 seconds. Security Commands 1110