Dell PowerEdge T300 Hardware Owner's Manual (PDF) - Page 109
Installing the System Fan, place see
View all Dell PowerEdge T300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Figure 3-25. Removing and Installing the System Fan 1 3 2 1 system fan 3 securing slots 2 fan release tab Installing the System Fan 1 Hold the replacement fan with the fan cable on the left side (opposite the power supply), and align the edges of the fan with the securing slots. 2 Slide the fan into the securing slots until the fan release tab locks into place (see Figure 3-25). 3 Connect the cable to the FAN2 connector on the system board (see Figure 6-1). Installing System Components 109
Installing System Components
109
Figure 3-25.
Removing and Installing the System Fan
Installing the System Fan
1
Hold the replacement fan with the fan cable on the left side (opposite the
power supply), and align the edges of the fan with the securing slots.
2
Slide the fan into the securing slots until the fan release tab locks into
place (see Figure 3-25).
3
Connect the cable to the FAN2 connector on the system board (see
Figure 6-1
).
1
system fan
2
fan release tab
3
securing slots
3
1
2