Dell PowerEdge T300 Hardware Owner's Manual (PDF) - Page 81
Press in on the blue tabs on each side of the hard drive bracket and slide, drive bay.
View all Dell PowerEdge T300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
3 Disconnect the data cable and the power cable from the hard drive in the drive bay. 4 Press in on the blue tabs on each side of the hard drive bracket and slide the drive up and out of the bay. Figure 3-13. Removing and Installing a Cabled Hard Drive 2 3 1 4 1 hard drive 3 power cable 2 data cable 4 blue tabs (2) NOTE: If you are not replacing the hard drive, remove the drive from the drive bracket (see Figure 3-14) and insert the empty bracket back into the drive bay. 5 Replace the system cover (see "Installing the System Cover" on page 67). Installing System Components 81
Installing System Components
81
3
Disconnect the data cable and the power cable from the hard drive in the
drive bay.
4
Press in on the blue tabs on each side of the hard drive bracket and slide
the drive up and out of the bay.
Figure 3-13.
Removing and Installing a Cabled Hard Drive
NOTE:
If you are not replacing the hard drive, remove the drive from the drive
bracket (see Figure 3-14) and insert the empty bracket back into the drive bay.
5
Replace the system cover (see "Installing the System Cover" on page 67).
1
hard drive
2
data cable
3
power cable
4
blue tabs (2)
3
4
2
1