Dell PowerEdge T300 Hardware Owner's Manual (PDF) - Page 65
Front Bezel Inserts, Removing a Front Bezel Insert
View all Dell PowerEdge T300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Front Bezel Inserts Removing a Front Bezel Insert NOTE: Before installing a drive in one or more of the front drive bays, first remove the corresponding insert(s) on the front bezel. NOTE: Bezel inserts may contain screws on the inside. You can attach the screws to new drives, as needed. 1 Remove the front bezel (see "Removing the Front Bezel" on page 63). 2 Press inward on one of the insert tabs, then pull the insert away from the bezel from the back of the bezel. See Figure 3-4. Figure 3-4. Removing and Installing the Front Bezel Insert 1 2 3 5 4 1 front bezel 3 tab notch 5 screws 2 front bezel insert 4 insert tab Installing System Components 65
Installing System Components
65
Front Bezel Inserts
Removing a Front Bezel Insert
NOTE:
Before installing a drive in one or more of the front drive bays, first remove
the corresponding insert(s) on the front bezel.
NOTE:
Bezel inserts may contain screws on the inside. You can attach the screws
to new drives, as needed.
1
Remove the front bezel (see "Removing the Front Bezel" on page 63).
2
Press inward on one of the insert tabs, then pull the insert away from the
bezel from the back of the bezel. See Figure 3-4.
Figure 3-4.
Removing and Installing the Front Bezel Insert
1
front bezel
2
front bezel insert
3
tab notch
4
insert tab
5
screws
1
4
2
5
3