Dell PowerEdge T300 Hardware Owner's Manual (PDF) - Page 20
SYSTEM NAME, E1000 FAILSAFE, Call Support, E1114 Temp Ambient, E1115 Temp Planar, E1118 CPU Temp - raid setup
View all Dell PowerEdge T300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table 1-5. LCD Status Messages Code Text Causes Corrective Actions N/A SYSTEM NAME A 62-character string that This message is for can be defined by the user in information only. the System Setup program. You can change the The SYSTEM NAME system ID and name in displays under the following the System Setup conditions: program (see "Entering • The system is powered on. the System Setup Program" on page 41). • The power is off and active errors are displayed. E1000 FAILSAFE, Check the system event log See "Getting Help" on Call Support for critical failure events. page 175. E1114 Temp Ambient Ambient system temperature is out of acceptable range. See "Troubleshooting System Cooling Problems" on page 145. E1115 Temp Planar Planar system temperature See "Troubleshooting is out of acceptable range. System Cooling Problems" on page 145. E1118 CPU Temp Interface The BMC is unable to Turn off power to the determine the CPU(s) system and restart the temperature status. system. If the problem Consequently, the BMC persists, see "Getting increases the CPU fan speed Help" on page 175. to maximum as a precautionary measure. E1210 CMOS Batt CMOS battery is missing, or See "Troubleshooting the the voltage is out of System Battery" on acceptable range. page 143. E1211 ROMB Batt RAID battery is either missing, bad, or unable to recharge due to thermal issues. Reseat the RAID battery connector. If the problem persists, replace the battery. E12nn ## PwrGd Specified voltage regulator See "Getting Help" on has failed. page 175. 20 About Your System