Dell PowerEdge T300 Hardware Owner's Manual (PDF) - Page 116
processor cover., lever from the locked position. Rotate the lever up, then open
View all Dell PowerEdge T300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
8 Position your thumb firmly over the socket release lever and release the lever from the locked position. Rotate the lever up, then open the processor cover. Figure 3-28. Installing and Removing a Processor 2 1 5 3 4 1 notch in processor (2) 3 ZIF socket 5 socket release lever 2 processor 4 socket key (2) NOTICE: Be careful not to bend any of the pins on the ZIF socket when removing the processor. Bending the pins can permanently damage the system board. 9 Gently, lift the processor out of the socket. Leave the release lever up so that the socket is ready for processor to be replaced. 116 Installing System Components
116
Installing System Components
8
Position your thumb firmly over the socket release lever and release the
lever from the locked position. Rotate the lever up, then open the
processor cover.
Figure 3-28.
Installing and Removing a Processor
NOTICE:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
9
Gently, lift the processor out of the socket. Leave the release lever up so
that the socket is ready for processor to be replaced.
1
notch in processor (2)
2
processor
3
ZIF socket
4
socket key (2)
5
socket release lever
1
2
3
4
5