Dell PowerEdge T300 Hardware Owner's Manual (PDF) - Page 67
Installing the System Cover, - parts
View all Dell PowerEdge T300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Figure 3-5. Removing and Installing the System Cover 1 2 5 4 3 1 cover release latch lock 3 hook slot 5 foot (4) 2 system cover 4 cover release latch Installing the System Cover 1 Ensure that all internal cables are connected and folded out of the way. 2 Ensure that no tools or extra parts are left inside the system. 3 Ensure that the cover release latch is in the up (open) position. 4 Align the metal hooks on the cover with the hook slots on the system chassis, then lower the cover until the cover is flush with the system (see Figure 3-5). 5 Rotate the cover release latch towards the front of the system, then press the latch into place to secure the cover. Installing System Components 67
Installing System Components
67
Figure 3-5.
Removing and Installing the System Cover
Installing the System Cover
1
Ensure that all internal cables are connected and folded out of the way.
2
Ensure that no tools or extra parts are left inside the system.
3
Ensure that the cover release latch is in the up (open) position.
4
Align the metal hooks on the cover with the hook slots on the system
chassis, then lower the cover until the cover is flush with the system (see
Figure 3-5).
5
Rotate the cover release latch towards the front of the system, then press
the latch into place to secure the cover.
1
cover release latch lock
2
system cover
3
hook slot
4
cover release latch
5
foot (4)
4
3
1
2
5