Dell PowerEdge T300 Hardware Owner's Manual (PDF) - Page 135
Troubleshooting the Keyboard or Mouse, and then reconnect them. - video card
View all Dell PowerEdge T300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Action 1 Check the system and power connections to the monitor. 2 Determine whether the system has an expansion card with a video output connector. In this system configuration, the monitor cable should normally be connected to the connector on the expansion card, not to the system's integrated video connector. To verify that the monitor is connected to the correct video connector, turn off the system and wait for 1 minute, then connect the monitor to the other video connector and turn the system on again. 3 Run the appropriate online diagnostic test (see "Using Dell PowerEdge Diagnostics" on page 163). If the tests run successfully, the problem is not related to video hardware. If the tests fail, see "Getting Help" on page 175. Troubleshooting the Keyboard or Mouse Problem • System message indicates a problem with the keyboard and/or mouse • Keyboard and/or mouse is not functioning or is functioning improperly. Action 1 Disconnect the keyboard and mouse cables from the system for 10 seconds and then reconnect them. If the problem is not resolved, proceed to the next step. 2 Try connecting the keyboard/mouse to the USB ports on the opposite side of the system. For example, if your are using the front USB ports, try connecting to the rear USB ports. If the problem is not resolved, proceed to the next step. If the problem is resolved, restart the system, enter the System Setup program, and check if the nonfunctioning USB ports are enabled. See "Getting Help" on page 175 if the ports are enabled but not functioning. Troubleshooting Your System 135