Dell PowerEdge T300 Hardware Owner's Manual (PDF) - Page 69

Figure 3-6. Removing and Installing a Blank Drive EMI Filler 1 2 1 tabs (2) 2 EMI filler Installing an EMI Filler NOTE: If you remove a drive from one or more of the 5.25-inch optical drive bays or the 3.5-inch diskette drive bay at the front of the system, replace the drive with an EMI filler. 1 Push the EMI filler into the empty 5.25-inch or 3.5-inch drive bay on the front of the chassis until the filler tabs lock into place (see Figure 3-6). 2 Replace the front bezel (see "Installing the Front Bezel" on page 64). Processor Airflow Shroud The processor airflow shroud directs airflow over the system processor and memory modules. NOTICE: Never operate your system with the processor airflow shroud removed. Overheating of the system can develop quickly, resulting in shutdown of the system and loss of data. Installing System Components 69