Dell PowerEdge T300 Hardware Owner's Manual (PDF) - Page 37
RAID DIMM slot, WARNING: Modifying - memory slots
View all Dell PowerEdge T300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Table 1-6. System Messages (continued) Message Causes TPM configuration operation honored Corrective Actions Information only. System will now restart. TPM failure A Trusted Platform See "Getting Help" on Module (TPM) function page 175. has failed. TPM operation is pending. Press I to Ignore or M to Modify to allow this change and reset the system. Configuration change has Press I to continue system been requested. boot. Press M to modify the TPM setting and restart. WARNING: Modifying could prevent security. Unexpected interrupt in protected mode DIMMs are improperly Reseat the DIMMs. See seated or the "Troubleshooting System keyboard/mouse controller Memory" on page 146. If the chip has failed. problem persists, see "Getting Help" on page 175. Unsupported DIMM detected in the RAID DIMM slot! DIMM installed in RAID DIMM slot is not supported. See "Troubleshooting System Memory" on page 146. If the problem persists, see "Getting Help" on page 175. Unsupported RAID key detected. The RAID key installed in Information only. the system is not supported on this system. Utility partition not available The key was Create a utility partition on pressed during POST, but the boot hard drive. See the no utility partition exists CDs that came with your on the boot hard drive. system. About Your System 37