Dell PowerEdge T610 Hardware Owner's Manual - Page 113
and out of the card guides. See it from the storage-card connector - perc controller
View all Dell PowerEdge T610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
b Grasp the storage card by its edge, carefully pull the card up to remove it from the storage-card connector, and continue to pull the card up and out of the card guides. See Figure 3-17. CAUTION: Disconnecting the RAID battery cable from a PERC card can cause data loss if the "dirty cache" LED on the card is lit. The LED indicates that data is still cached in controller memory and the data was not cleared at system shutdown. 6 If applicable and necessary, disconnect the RAID battery cable from the card. See Figure 3-17. Installing System Components 113
Installing System Components
113
b
Grasp the storage card by its edge, carefully pull the card up to remove
it from the storage-card connector, and continue to pull the card up
and out of the card guides. See Figure 3-17.
CAUTION:
Disconnecting the RAID battery cable from a PERC card can cause
data loss if the "dirty cache" LED on the card is lit. The LED indicates that data is
still cached in controller memory and the data was not cleared at system
shutdown.
6
If applicable and necessary, disconnect the RAID battery cable from the
card. See Figure 3-17.