Dell PowerEdge T610 Hardware Owner's Manual - Page 95
Installing a Cooling-Fan Module, Install the cooling shroud. See Installing the Cooling Shroud.
View all Dell PowerEdge T610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Figure 3-10. Removing and Installing a Cooling-Fan Module 2 3 1 1 4 1 release tabs (2) 3 cooling shroud 2 cooling-fan module 4 outer fan-module slot Installing a Cooling-Fan Module CAUTION: Never attempt to operate your system without at least one cooling-fan module installed. If only one cooling-fan module is being installed, it must be installed in the outer module position in the cooling shroud. 1 Hold the replacement cooling-fan module by the release tabs, and align the tabs on the module with the securing slots on the cooling shroud. 2 Slide the module down into the cooling shroud until the release tabs lock into place. See Figure 3-10. 3 Install the cooling shroud. See "Installing the Cooling Shroud." 4 Install the expansion card stabilizer. See "Installing the Expansion Card Stabilizer." Installing System Components 95