Dell PowerEdge T610 Hardware Owner's Manual - Page 80
Opening and Closing the System, Opening the System
View all Dell PowerEdge T610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Figure 3-2. Removing and Installing the Front Bezel 2 1 3 1 front bezel 3 bezel tab slots (2) 4 2 lever 4 bezel tabs (2) Opening and Closing the System WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by yourself. Opening the System 1 Unless you are installing a hot-swap component such as a hard drive or power supply, turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals. 2 Remove the front bezel. See "Removing the Front Bezel." 3 Rotate the system feet inward. See Figure 3-3. 4 Lay the system on its side as shown in Figure 3-3. 80 Installing System Components
80
Installing System Components
Figure 3-2.
Removing and Installing the Front Bezel
Opening and Closing the System
WARNING:
Whenever you need to lift the system, get others to assist you. To
avoid injury, do not attempt to lift the system by yourself.
Opening the System
1
Unless you are installing a hot-swap component such as a hard drive or
power supply, turn off the system and attached peripherals, and disconnect
the system from the electrical outlet and peripherals.
2
Remove the front bezel. See "Removing the Front Bezel."
3
Rotate the system feet inward. See Figure 3-3.
4
Lay the system on its side as shown in Figure 3-3.
1
front bezel
2
lever
3
bezel tab slots (2)
4
bezel tabs (2)
4
2
1
3