Dell PowerEdge T610 Hardware Owner's Manual - Page 44
Warning: Memory, address, value - maximum memory
View all Dell PowerEdge T610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Table 1-2. System Messages (continued) Message Causes Corrective Actions Local keyboard may not work because all user accessible USB ports are disabled. If operating locally, power cycle the system and enter system setup program to change settings. The USB ports are disabled in the system BIOS. Power down and restart the system from the power button, and then enter the System Setup program to enable the USB port(s). See "Entering the System Setup Program." Manufacturing mode detected System is in manufacturing Reboot to take the system mode. out of manufacturing mode. Maximum rank count exceeded. The following DIMM has been disabled: x Invalid memory configuration. The system will run but with the specified memory module disabled. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines." Memory address line failure at address, read value expecting value Faulty or improperly installed See "Troubleshooting memory modules. System Memory." Memory double word logic failure at address, read value expecting value Faulty or improperly installed See "Troubleshooting memory modules. System Memory." Memory Initialization Warning: Memory size may be reduced Invalid memory Ensure that the memory configuration. The system modules are installed in a will run but with less memory valid configuration. See than is physically available. "General Memory Module Installation Guidelines." 44 About Your System