Dell PowerEdge T610 Hardware Owner's Manual - Page 172
Expansion Card., Card Stabilizer.
View all Dell PowerEdge T610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
6 Ensure that each expansion card is firmly seated in its connector. See "Installing an Expansion Card." 7 Install the expansion card stabilizer. See "Installing the Expansion Card Stabilizer." 8 Close the system. See "Closing the System." 9 Place the system upright and on its feet on a flat and stable surface, reconnect the system to the electrical outlet, and turn on the system and attached peripherals. 10 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 11 Open the system. See "Opening the System." 12 Remove the expansion card stabilizer. See "Removing the Expansion Card Stabilizer." 13 Remove all expansion cards installed in the system. See "Installing an Expansion Card." 14 Install the expansion card stabilizer. See "Installing the Expansion Card Stabilizer." 15 Close the system. See "Closing the System." 16 Place the system upright and on its feet on a flat and stable surface, reconnect the system to the electrical outlet, and turn on the system and attached peripherals. 17 Run the appropriate online diagnostic test. If the tests fail, see "Getting Help." 18 For each expansion card you removed in step 13, perform the following steps: a Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. b Remove the expansion card stabilizer. See "Removing the Expansion Card Stabilizer." c Open the system. See "Opening the System." d Reinstall one of the expansion cards. 172 Troubleshooting Your System