Dell PowerEdge T610 Hardware Owner's Manual - Page 179

Jumpers and Connectors CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. System Board Jumpers For information on resetting the password jumper to disable a password, see "Disabling a Forgotten Password." Table 6-1. System Board Jumper Settings Jumper PWRD_EN Setting (default) NVRAM_CLR (default) Description The password feature is enabled (pins 2-4) The password feature is disabled, and iDRAC6 local access is unlocked at the next AC power cycle. (pins 4-6) The configuration settings are retained at system boot (pins 3-5) The configuration settings are cleared at the next system boot (pins 1-3) System Board Connectors CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. Jumpers and Connectors 179