Dell PowerEdge T610 Hardware Owner's Manual - Page 94
Removing a Cooling-Fan Module, Open the system. See Opening the System.
View all Dell PowerEdge T610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Removing a Cooling-Fan Module WARNING: The cooling fans can continue to spin for some time after the system has been powered down. Allow time for the fans to stop spinning before handling them. CAUTION: The system requires at minimum a cooling-fan module to be installed in the cooling shroud's outer fan-module slot (see Figure 3-10) at all times to ensure proper system cooling. 1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals. 2 Open the system. See "Opening the System." 3 Remove the expansion card stabilizer. See "Removing the Expansion Card Stabilizer." 4 Remove the cooling shroud (see "Removing the Cooling Shroud") and turn the shroud upside-down. 5 Press the fan-module release tabs towards each other, and slide the module up and out of the cooling shroud. See Figure 3-10. 94 Installing System Components