HP C8180 Windows Help - Page 142

6. Clean only the copper-colored contacts. Maintain the HP All-in-One 1 Copper-colored contacts 7. Place the ink cartridge back into the empty slot and press down on the gray latch until it clicks into place. 8. Repeat if necessary for the other ink cartridges. 9. Gently close the ink cartridge door. Remove ink from your skin and clothing Follow these instructions to remove ink from your skin and clothing: Surface Skin White fabric Color fabric Remedy Wash the area with an abrasive soap. Wash the fabric in cold water and use chlorine bleach. Wash the fabric in cold water and use sudsy ammonia. CAUTION: Always use cold water to remove ink from fabric. Warm or hot water can set the ink into the fabric. Reduce energy consumption when the HP All-in-One is off When the HP All-in-One is off, an amount of energy is still being consumed. Energy consumption can be lessened by enabling the Federal Energy Management Program (FEMP) mode. NOTE: When the HP All-in-One is in FEMP mode, it will take longer than usual to turn back on. To enable FEMP mode ▲ Press and hold the On button for 3 seconds until the HP All-in-One turns off. Reduce energy consumption when the HP All-in-One is off 141