HP ML370 HP ProLiant ML370 Generation 3 Setup and Installation Guide - Page 120
Installing an Expansion Board, Removing an Expansion Slot Cover in
UPC - 613326765616
View all HP ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Installing Hardware Options Installing an Expansion Board CAUTION: To avoid the risk of damage to the system or expansion boards, remove all AC power cords before installing or removing expansion boards. Pressing the Power On/Standby button to power down the server still provides auxiliary power to the expansion slot and may damage the board or other system components. To install an expansion board: 1. Open the PCI-X slot release lever and remove the expansion slot cover. Refer to "Removing an Expansion Slot Cover" in this chapter. 2. Press the PCI-X guide clip out toward the center wall to release. The clip locks into an open position until the board is secured. NOTE: The PCI-X guide helps align and secure a full-sized expansion board. Figure 3-63: Releasing the PCI-X guide clip HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 3-75