HP ML370 HP ProLiant ML370 Generation 3 Setup and Installation Guide - Page 81

Installing Hardware Options Table 3-11 lists the 2-to-1 interleaving DIMM option kits available from HP for use with the server. Use the option kit part number when ordering additional memory for the server. Use the spare and component part numbers for reference when ordering replacement parts or when contacting an authorized service provider. Table 3-11: DIMM Part Numbers Description 512-MB DDR option kit (2×256 MB) 1-GB DDR option kit (2×512 MB) 2-GB DDR option kit (2×1 GB) 4-GB DDR option kit (2×2 GB) Option Kit 300678-B21 300679-B21 300680-B21 300682-B21 Spare 300669-001 Component 261583-031 300700-001 261584-041 300701-001 261585-041 300702-001 261586-051 IMPORTANT: Use only the DIMMs and option kits specified for the server. DIMMs not specified for the server may not support online spare memory configuration. Installing DIMMs Before installing DIMMs, review the DIMM installation guidelines in "Standard ECC DIMM Installation Guidelines" and "Online Spare DIMM Installation Guidelines." CAUTION: Electrostatic discharge can damage electronic components. Properly ground yourself before beginning any installation procedure. Refer to Appendix B, "Electrostatic Discharge," for more information. To install a DIMM in an available DIMM slot: 1. Power down the server. Refer to "Powering Down the Server" in this chapter. 2. Remove the access panel. Refer to "Removing the Access Panel" in this chapter. 3. Identify the correct DIMM slots and banks. Refer to "Identifying DIMM Slots" in this chapter. 3-36 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide