HP ML370 HP ProLiant ML370 Generation 3 Setup and Installation Guide - Page 210

Troubleshooting • Problems After Initial Boot Once the server has passed the POST, you may still encounter errors, such as an inability to load your operating system. You are provided with instructions on what to try and where to go for help when you encounter errors after the server completes the POST. • ROMPaq Disaster Recovery During troubleshooting, it may become apparent that your system ROM is corrupted. Because the server has redundant ROM capability, you can use the backup ROM. If both ROMs are corrupted, you must perform the ROMPaq disaster recovery procedure. • Information Resources This section provides a list of reference information available for the server. For troubleshooting information beyond the scope of this guide, both general and specific to the server, refer to Table D-8 at the end of this appendix. When the Server Does Not Start This section provides systematic instructions on what to try and where to go for help for the most common problems encountered during initial Power-On Self-Test (POST). The server must first complete this test each time you power up, before it can load the operating system and start running software applications. WARNING: There is a risk of personal injury from hazardous energy levels. The installation of options, and the routine maintenance and service of this product must be performed by individuals who are knowledgeable about the procedures, precautions, and hazards associated with equipment containing hazardous energy circuits. D-2 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide