HP ML370 HP ProLiant ML370 Generation 3 Setup and Installation Guide - Page 98

Installing Hardware Options 12. Reinstall the following items: - CD-ROM drive, if needed - Center wall - Expansion boards - Processor air baffle - Bezel blanks NOTE: If the second media bay is already populated with an optional drive, store the extra bezel blank for later use. 13. Install other hardware options as needed or reinstall the access panel. 14. Power up the server. Installing a Half-Height or Full-Height Media Device You can install up to two half-height or one full-height removable devices in the removable media cage. To install a half-height or full-height media device: 1. Power down the server. Refer to "Powering Down the Server" in this chapter. 2. Remove the access panel. Refer to "Removing the Access Panel" in this chapter. 3. Access the removable media cage. Refer to "Accessing the Removable Media Cage" in this chapter. NOTE: HP recommends that you remove all bezel blanks to facilitate drive installation. HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 3-53