HP ML370 HP ProLiant ML370 Generation 3 Setup and Installation Guide - Page 67

Installing Hardware Options Installing Hardware Options This chapter includes step-by-step instructions for installing: • Processors and PPMs • Memory • Hot-plug SCSI hard drives • Removable media devices • Optional internal two-bay hot-plug SCSI drive cage • Redundant hot-plug fans • Redundant hot-plug power supply • Expansion boards For additional instructions for installing and configuring hardware options, refer to the documentation that ships with each option kit. For information on obtaining hardware options and upgrades for the server, refer to www.hp.com/products/servers/platforms/ Processors and PPMs CAUTION: The processor, heatsink, and retaining clip comprise a single assembly. Separating the processor from the heatsink causes thermal instability and damage to the server. IMPORTANT: If you must replace a failed processor or processors, clear the status log in RBSU after powering up the server. Refer to the maintenance and service guide for replacement instructions or contact your authorized service provider. Installing a Second Processor and PPM The server supports the installation of a second Intel Xeon processor for enhanced performance. Processor option kits available for the server include an Intel Xeon processor with heatsink and a processor power module (PPM). 3-22 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide