HP ML370 HP ProLiant ML370 Generation 3 Setup and Installation Guide - Page 140

Installing the Rack Server Securing Cables with the Cable Management Arm The cable management arm that ships in the rack kit with the server includes hook-and-loop straps that are used to secure multiple server and peripheral cables to the arm. Using the guidelines in this section enhances cable management among several servers in a rack configuration. Securing Server Cables Use the cable management straps attached to the cable management arm to collect and secure external power, network, and peripheral device cables. IMPORTANT: Extend the server from the rack before routing cables through the cable management arm to allow the proper amount of slack in the cables. Refer to "Extending the Server from the Rack" in this chapter for instructions. Figure 4-15: Server cables secured to the cable management arm CAUTION: After securing the cables and before powering up the server, always extend and retract the server to be sure that cables remain connected when the server is at full extension. HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 4-17