HP ML370 HP ProLiant ML370 Generation 3 Setup and Installation Guide - Page 134
and slide the server smoothly to the back of the rack., Once the server reaches the back of the rack
UPC - 613326765616
View all HP ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Installing the Rack Server 2. Carefully align the tapered ends of the server rails on the rear of the server with the open end of the spring-load rack rail assembly at the front of the rack. 3. Be sure that both server rails are balanced within the spring-load rail assembly and slide the server smoothly to the back of the rack. Figure 4-8: Aligning the server rails with the rack rails and inserting the server CAUTION: Keep the server parallel to the floor when sliding the server rails into the spring-load rack rails. Tilting the server up or down can result in damage to the rails. IMPORTANT: If the server does not slide into the rack smoothly the first time, remove it completely and reinsert the server rails into the spring-load rail assembly. 4. Once the server reaches the back of the rack, slide it all the way back out of the rack until the spring-load rack assembly is fully extended and the rails lock. This action initializes the rail lock for future use. HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 4-11