HP ML370 HP ProLiant ML370 Generation 3 Setup and Installation Guide - Page 131
Grasp the far end of the spring-load assembly with your other hand and pull
UPC - 613326765616
View all HP ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Installing the Rack Server 2. Insert the rail tabs from the spring-loaded end of the assembly into the marked holes on the interior of the vertical rails on the front of the rack (1). IMPORTANT: The smooth side of the spring-load rail assembly must face the outside of the rack. 3. Grasp the spring-load rail assembly and squeeze the two spring release tabs in toward the rail to unlock the spring mechanism (2). 4. Grasp the far end of the spring-load assembly with your other hand and pull the rail in toward you until the rack tabs on the fixed end of the assembly clear the interior side of the rear vertical rack rail (3). Figure 4-5: Inserting the spring-load rails into the front of the rack 4-8 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide