HP ML370 HP ProLiant ML370 Generation 3 Setup and Installation Guide - Page 82
Install other hardware options or replace the access panel before powering up
UPC - 613326765616
View all HP ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Installing Hardware Options IMPORTANT: DIMMs must be installed in pairs so that both slots in the bank are populated with identical DIMMs. 4. Open the DIMM slot latches (1). 5. Align the key slot in the bottom edge of the DIMM with the tab in the slot (2). Figure 3-28: Installing a DIMM in a DIMM slot IMPORTANT: DIMMs do not seat if turned the wrong way. 6. Press down evenly on the DIMM until it is seated securely in the slot and the latches close. 7. Repeat steps 4 and 5 to install the second DIMM in the pair. 8. Install other hardware options or replace the access panel before powering up the server. If you are installing DIMMs for the online spare configuration, use RBSU to configure this feature. Refer to Chapter 7, "Server Configuration and Utilities," for additional information. HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 3-37